Product Technical Spec.
Body Material:
Steel, corrosion resisting
Body Style:
Standard round b
Shoulder Diameter:
Between 1.3115 inches and 1.3120 inches
Pilot Diameter:
Between 0.8745 inches and 0.8750 inches
Overall Length:
3.0210 inches
Flange Diameter:
Between 1.4340 inches and 1.4370 inches
Flange Thickness:
Between 0.0900 inches and 0.0960 inches
Undercut Width:
Between 0.0730 inches and 0.0830 inches
Shaft Diameter:
0.1870 inches single shaft and 0.1872 inches single shaft
Shaft Length:
0.4230 inches single shaft
Fragility Factor:
Moderately rugged
Stator Input Voltage Rating In Volts:
90.0
Stator Input Current Rating:
25.0 milliamperes
Stator Input Electrical Power Rating:
700.0 milliwatts
Phase Shift Angle In Deg:
20.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
60.00 input
Maximum Total Null Voltage Output In Millivolts Per Volt:
90.00
Electrical Error Angular Range In Minutes:
-6.0/+6.0
Spline Tooth Quantity:
21 single shaft
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0006 inches
Shaft End Play:
0.0015 inches
Pilot Length:
0.0370 mils and 0.0430 centimeters
Shoulder Length:
0.1290 mils and 0.1350 centimeters
Mounting Surface To Terminal End Distance:
2.3910 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Maximum Runout:
0.0008 inches
Shaft Thread Series Designator:
Unef single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Shaft Thread Length:
0.3550 inches single shaft
Shaft Type:
Spline w/threads single shaft
Transformation Ratio:
Between 0.720 rotor to stator and 0.749 rotor to stator
Shaft Thread Size:
0.190 inches single shaft
Shaft Radial Play Determining Weight:
8.0 ounces
Shaft End Play Determining Weight:
8.0 ounces
Terminal Type And Quantity:
5 screw
Item Name:
Synchro,control Transformer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
