Product Technical Spec.
Body Material:
Steel, stainless
Body Style:
Standard round c
Shoulder Diameter:
1.0000 inches
Pilot Diameter:
0.6250 inches
Overall Length:
2.1840 inches
Flange Diameter:
1.0620 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
0.0500 inches
Shaft Diameter:
0.1200 inches single shaft
Shaft Length:
0.3120 inches single shaft
Schematic Diagram Designator:
1 y-rotor, 1 stator
Fragility Factor:
Moderately rugged
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
21.0 milliamperes
Stator Input Electrical Power Rating:
30.0 milliwatts
Frequency In Hertz:
400.0
Zro Impedance Magnitude In Ohms:
3340.00
Zro Impedance Angle In Deg:
79.20
Zso Impedance Magnitude In Ohms:
577.00
Zso Impedance Angle In Deg:
80.70
Zrs Impedance Magnitude In Ohms:
659.00
Zrs Impedance Angle In Deg:
30.10
Rotor Dc Resistance In Ohms:
385.00
Stator Dc Resistance In Ohms:
60.00
Phase Shift Angle In Deg:
4.200 output to input
Maximum Fundamental Null Voltage In Millivolts Per Volt:
25.00 input
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Electrical Error Angular Range In Minutes:
-2.0/+2.0
Actuator Friction Torque At Minus 55 Deg Celsius:
16.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
4.0 centimeter-grams
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0010 inches
Shaft End Play:
Between 0.0005 inches and 0.0015 inches
Pilot Length:
0.0620 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.7340 inches
Shaft Maximum Runout:
0.0014 inches
Shaft Slot Depth:
0.0300 inches single shaft
Shaft Slot Width:
0.0250 inches single shaft
Shaft Type:
Round, slotted single shaft
Transformation Ratio:
2.203 rotor to stator
Shaft Radial Play Determining Weight:
4.0 ounces
Shaft End Play Determining Weight:
16.0 ounces
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro,control Transformer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
