Product Technical Spec.
Body Material:
Steel, stainless
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
2.3500 inches
Flange Diameter:
Between 1.0570 inches and 1.0650 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
0.0550 inches
Shaft Diameter:
0.1242 inches single shaft and 0.1247 inches single shaft
Shaft Length:
0.5620 inches single shaft
Maximum Tempurature Rise:
1.0 degrees celsius
Stator Input Voltage Rating In Volts:
90.0
Stator Input Current Rating:
20.0 milliamperes
Stator Input Electrical Power Rating:
180.0 milliwatts
Frequency In Hertz:
400.0
Zro Impedance Magnitude In Ohms:
3280.00
Zro Impedance Angle In Deg:
79.20
Zso Impedance Magnitude In Ohms:
5380.00
Zso Impedance Angle In Deg:
80.70
Rotor Dc Resistance In Ohms:
355.00
Stator Dc Resistance In Ohms:
585.00
Phase Shift Angle In Deg:
4.500 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
45.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
75.00
Electrical Error Angular Range In Minutes:
-7.0/+7.0
Spline Tooth Quantity:
13 single shaft
Actuator Friction Torque At Minus 55 Deg Celsius:
16.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
4.0 centimeter-grams
Alignment Hole Quantity:
4
Pilot Length:
0.0620 inches
Shoulder Length:
0.0690 inches
Mounting Surface To Terminal End Distance:
1.7880 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Length:
0.1870 inches single shaft
Shaft Type:
Spline w/threads single shaft
Alignment Hole Depth:
0.0990 inches
Transformation Ratio:
0.735 rotor to stator
Alignment Hole Bolt Circle Diameter:
0.8120 inches
Shaft Thread Size:
0.124 inches single shaft
Terminal Type And Quantity:
5 screw
Item Name:
Synchro,control Transformer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
