Detail Specifications
Body Material:
Steel, corrosion resisting
Body Style:
Standard round d
Shoulder Diameter:
2.7000 inches
Pilot Diameter:
0.3120 inches
Second Shoulder Diameter:
2.7500 inches
Second Shoulder Length:
0.3750 inches
Overall Length:
5.2000 inches
Flange Diameter:
3.1000 inches
Flange Thickness:
0.2500 inches
Body Diameter:
2.7000 inches
Shaft Diameter:
0.2500 inches single shaft
Shaft Length:
0.8100 inches single shaft
Schematic Diagram Designator:
1 y-rotor, 1 stator
Fragility Factor:
Moderately rugged
Maximum Tempurature Rise:
60.0 degrees celsius
Rotor Input Voltage Rating In Volts:
115.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
1.76 amperes
Rotor Input Electrical Power Rating:
17.0 watts
Maximum Fundamental Null Voltage In Millivolts Per Volt:
75.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
100.00
Electrical Error Angular Range In Minutes:
-8.0/+8.0
Actuator Friction Torque At Minus 55 Deg Celsius:
0.50 inch-ounces
Actuator Friction Torque At Plus 25 Deg Celsius:
0.20 inch-ounces
Torque Gradient Per Angular Deg:
0.670 inch-ounces
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0005 inches
Shaft End Play:
0.0040 inches
Pilot Length:
0.0300 inches
Shoulder Length:
0.6150 inches
Aft Of First Flange Diameter:
2.7500 inches
Mounting Surface To Terminal End Distance:
4.4300 inches
Shaft Maximum Runout:
0.0005 inches
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Shaft Thread Length:
0.3000 inches single shaft
Shaft Type:
Round, threaded single shaft
Transformation Ratio:
0.783 stator to rotor
Shaft Thread Size:
0.250 inches single shaft
Shaft Radial Play Determining Weight:
16.0 ounces
Shaft End Play Determining Weight:
48.0 ounces
Test Data Document:
81349-mil-s-16892 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
5 screw
Specification Data:
81349-mil-s-16892-31tx4a government specification
Item Name:
Synchro Master Crane
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC