Detail Specifications
Body Material:
Steel, stainless
Body Style:
Standard round a
Pilot Diameter:
0.5000 inches
Overall Length:
1.6300 inches
Flange Diameter:
0.7500 inches
Flange Thickness:
0.0620 inches
Undercut Diameter:
0.6910 inches
Undercut Width:
0.0620 inches
Shaft Diameter:
0.0900 inches single shaft
Shaft Length:
0.4150 inches single shaft
Stator Input Voltage Rating In Volts:
26.00
Stator Input Current Rating:
113.0 milliamperes
Stator Input Electrical Power Rating:
0.54 watts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
54.00
Zso Resistance In Ohms:
12.00
Rotor Dc Resistance In Ohms:
37.00
Stator Dc Resistance In Ohms:
12.00
Phase Shift Angle In Deg:
8.500 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Actuator Friction Torque At Minus 55 Deg Celsius:
9.00 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
3.00 centimeter-grams
Shaft Maximum Radial Play:
0.0008 inches
Shaft End Play:
Between 0.0005 inches and 0.0015 inches
Pilot Length:
0.0400 inches
Mounting Surface To Terminal End Distance:
1.2400 inches
Shaft Maximum Runout:
0.0010 inches
Plus J Zro Reactance In Ohms:
260.00
Shaft Slot Depth:
0.0300 inches single shaft
Plus J Zso Reactance In Ohms:
45.00
Shaft Slot Width:
0.0250 inches single shaft
Shaft Type:
Round, slotted single shaft
Transformation Ratio:
0.454 rotor to stator
Shaft Radial Play Determining Weight:
4.0 ounces
Shaft End Play Determining Weight:
8.0 ounces
Test Data Document:
96214-530500 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro,control Transformer
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
