Product Technical Spec.
Body Material:
Steel, stainless
Body Style:
Standard round c
Shoulder Diameter:
Between 0.8118 inches and 0.8123 inches
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
Between 2.4100 inches and 2.4700 inches
Flange Diameter:
Between 0.9360 inches and 0.9370 inches
Flange Thickness:
0.0630 inches
Undercut Diameter:
Between 0.8300 inches and 0.8500 inches
Undercut Width:
Between 0.0590 inches and 0.0650 inches
Shaft Diameter:
0.1245 inches single shaft and 0.1247 inches single shaft
Shaft Length:
1.1350 inches single shaft and 1.1890 inches single shaft
Schematic Diagram Designator:
1 y-rotor, 1 stator
Fragility Factor:
Moderately rugged
End Application:
4920-00-400-3818
Securing Hole Quantity:
3
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
24.0 milliamperes
Stator Input Electrical Power Rating:
34.0 milliwatts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
695.00
Zso Resistance In Ohms:
115.00
Zrs Resistance In Ohms:
874.00
Phase Shift Angle In Deg:
9.000 output to input
Maximum Fundamental Null Voltage In Millivolts Per Volt:
25.00 input
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Electrical Error Angular Range In Minutes:
-15.0/+15.0
Actuator Friction Torque At Minus 55 Deg Celsius:
9.00 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
3.00 centimeter-grams
Alignment Hole Quantity:
3
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0005 inches
Shaft End Play:
0.0010 inches
Pilot Length:
0.0350 mils and 0.0410 centimeters
Shoulder Length:
0.0590 mils and 0.0650 centimeters
Mounting Surface To Terminal End Distance:
1.2400 inches
Shaft Maximum Runout:
0.0010 inches
Mounting Facility Screw Thread Series Designator:
Unf
Plus J Zro Reactance In Ohms:
2600.00
Shaft Slot Depth:
0.0250 inches single shaft
Plus J Zso Reactance In Ohms:
447.00
Shaft Slot Width:
0.0200 inches single shaft
Plus J Zrs Reactance In Ohms:
286.00
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.0700 inches
Mounting Facility Screw Thread Diameter:
0.0860 inches
Transformation Ratio:
2.203 rotor to stator
Alignment Hole Bolt Circle Diameter:
Between 0.6750 inches and 0.6810 inches
Shaft Radial Play Determining Weight:
4.0 ounces
Shaft End Play Determining Weight:
8.0 ounces
Terminal Type And Quantity:
6 wire lead
Item Name:
Synchro,control Transformer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
