Product Technical Spec.
Body Material:
Any acceptable
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
Between 2.3850 inches and 2.4150 inches
Flange Diameter:
1.0620 inches
Flange Thickness:
Between 0.0900 inches and 0.0960 inches
Undercut Diameter:
0.9850 inches
Undercut Width:
0.0450 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.5510 inches single shaft and 0.5750 inches single shaft
Stator Input Voltage Rating In Volts:
90.0
Stator Input Current Rating:
20.0 milliamperes
Stator Input Electrical Power Rating:
300.0 milliwatts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
700.00
Zso Resistance In Ohms:
1100.00
Rotor Dc Resistance In Ohms:
350.00
Stator Dc Resistance In Ohms:
650.00
Phase Shift Angle In Deg:
7.500 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
30.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
60.00
Electrical Error Angular Range In Minutes:
-5.0/+5.0
Actuator Friction Torque At Minus 55 Deg Celsius:
16.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
4.0 centimeter-grams
Pilot Length:
0.0620 inches
Shoulder Length:
Between 0.0590 inches and 0.0650 inches
Mounting Surface To Terminal End Distance:
Between 1.8340 inches and 1.8400 inches
Plus J Zro Reactance In Ohms:
2800.00
Shaft Slot Depth:
0.0200 inches single shaft and 0.0350 inches single shaft
Plus J Zso Reactance In Ohms:
0.450
Shaft Slot Width:
0.0200 inches single shaft and 0.0350 inches single shaft
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.1250 inches
Alignment Hole Bolt Circle Diameter:
Between 0.8090 inches and 0.8150 inches
Terminal Type And Quantity:
5 screw
Item Name:
Synchro,control Transformer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
