Product Technical Spec.
Body Material:
Steel, corrosion resisting
Body Style:
Standard round a
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
1.6160 inches
Flange Diameter:
Between 0.7490 inches and 0.7500 inches
Flange Thickness:
0.0620 inches
Undercut Diameter:
Between 0.6880 inches and 0.6910 inches
Undercut Width:
0.0620 inches
Shaft Diameter:
0.0850 inches single shaft and 0.0900 inches single shaft
Shaft Length:
0.3770 inches single shaft
Schematic Diagram Designator:
1 y-rotor, 1 stator
Fragility Factor:
Moderately rugged
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
30.0 milliamperes
Stator Input Electrical Power Rating:
73.0 milliwatts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
470.00
Zso Resistance In Ohms:
81.00
Zrs Resistance In Ohms:
590.00
Rotor Dc Resistance In Ohms:
365.00
Stator Dc Resistance In Ohms:
64.00
Phase Shift Angle In Deg:
8.500 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Electrical Error Angular Range In Minutes:
-7.0/+7.0
Actuator Friction Torque At Minus 55 Deg Celsius:
16.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
4.0 centimeter-grams
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0005 inches
Shaft End Play:
Between 0.0003 inches and 0.0008 inches
Pilot Length:
0.0430 inches
Mounting Surface To Terminal End Distance:
1.2410 inches
Shaft Maximum Runout:
0.0010 inches
Plus J Zro Reactance In Ohms:
1770.00
Shaft Slot Depth:
0.0250 inches single shaft
Plus J Zso Reactance In Ohms:
330.00
Shaft Slot Width:
0.0200 inches single shaft
Plus J Zrs Reactance In Ohms:
190.00
Shaft Type:
Round, slotted single shaft
Shaft Radial Play Determining Weight:
4.0 ounces
Shaft End Play Determining Weight:
8.0 ounces
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro,control Transformer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Number:
CTH-8-A-4/A013
Part Number:
3563080-0170
