Product Technical Spec.
Body Material:
Steel, stainless
Body Style:
Standard round c
Shoulder Diameter:
Between 0.8118 inches and 0.8123 inches
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
1.6590 inches
Flange Diameter:
Between 0.9360 inches and 0.9370 inches
Flange Thickness:
0.0630 inches
Undercut Diameter:
0.8400 inches
Undercut Width:
0.0620 inches
Shaft Diameter:
0.0895 inches single shaft and 0.0900 inches single shaft
Shaft Length:
0.4180 inches single shaft
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
21.0 milliamperes
Stator Input Electrical Power Rating:
50.0 milliwatts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
800.00
Zso Resistance In Ohms:
115.00
Zrs Resistance In Ohms:
890.00
Rotor Dc Resistance In Ohms:
560.00
Stator Dc Resistance In Ohms:
100.00
Phase Shift Angle In Deg:
9.000 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Electrical Error Angular Range In Minutes:
-7.5/+7.5
Actuator Friction Torque At Minus 55 Deg Celsius:
6.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
3.0 centimeter-grams
Alignment Hole Quantity:
3
Pilot Length:
0.0380 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.2410 inches
Plus J Zro Reactance In Ohms:
470.00
Shaft Slot Depth:
0.3000 inches single shaft
Plus J Zso Reactance In Ohms:
470.00
Shaft Slot Width:
0.0150 inches single shaft and 0.0300 inches single shaft
Plus J Zrs Reactance In Ohms:
350.00
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.0500 inches
Transformation Ratio:
1.991 rotor to stator
Alignment Hole Bolt Circle Diameter:
0.6780 inches
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro,control Transformer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
