Detail Specifications
Body Material:
Any acceptable
Body Style:
Standard round a
Pilot Diameter:
0.6250 inches
Overall Length:
2.2380 inches
Flange Diameter:
1.0620 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
Between 0.9995 inches and 1.0000 inches
Undercut Width:
0.0500 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Stator Input Voltage Rating In Volts:
10.2
Stator Input Current Rating:
165.0 milliamperes
Stator Input Electrical Power Rating:
0.25 watts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
418.00
Zso Resistance In Ohms:
74.30
Zrs Resistance In Ohms:
104.00
Rotor Dc Resistance In Ohms:
Between 40.00 and 62.10
Stator Dc Resistance In Ohms:
1.50
Maximum Fundamental Null Voltage In Millivolts Per Volt:
30.00 output
Actuator Friction Torque At Minus 55 Deg Celsius:
16.00 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
4.00 centimeter-grams
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0008 inches
Shaft End Play:
Between 0.0005 inches and 0.0015 inches
Pilot Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.8000 inches
Shaft Maximum Runout:
0.0010 inches
Plus J Zro Reactance In Ohms:
78.30
Shaft Slot Depth:
0.0300 inches single shaft
Plus J Zso Reactance In Ohms:
79.70
Shaft Slot Width:
0.0250 inches single shaft
Plus J Zrs Reactance In Ohms:
26.80
Shaft Type:
Round, slotted single shaft
Transformation Ratio:
2.291 rotor to stator
Shaft Radial Play Determining Weight:
4.0 ounces
Shaft End Play Determining Weight:
8.0 ounces
Test Data Document:
20418-es1607 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro,control Transformer
Manufacturer Part Numbers
No other part numbers with same form, fit, and function found.