Product Technical Spec.
Body Material:
Steel, corrosion resisting
Body Style:
Standard round c
Shoulder Diameter:
Between 1.3115 inches and 1.3120 inches
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
2.1750 inches
Flange Diameter:
Between 1.4360 inches and 1.4370 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
Between 1.3090 inches and 1.3120 inches
Undercut Width:
0.0780 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.4150 inches single shaft
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
28.0 milliamperes
Stator Input Electrical Power Rating:
43.0 milliwatts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
320.00
Zso Resistance In Ohms:
53.00
Zrs Resistance In Ohms:
315.00
Rotor Dc Resistance In Ohms:
180.00
Stator Dc Resistance In Ohms:
37.00
Phase Shift Angle In Deg:
4.500 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Electrical Error Angular Range In Minutes:
-5.0/+5.0
Actuator Friction Torque At Minus 55 Deg Celsius:
16.00 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
4.00 centimeter-grams
Alignment Hole Quantity:
4
Pilot Length:
0.0400 inches
Shoulder Length:
0.1320 inches
Mounting Surface To Terminal End Distance:
1.7600 inches
Plus J Zro Reactance In Ohms:
2030.00
Shaft Slot Depth:
0.0220 inches single shaft and 0.0320 inches single shaft
Plus J Zso Reactance In Ohms:
353.00
Shaft Slot Width:
0.0220 inches single shaft and 0.0320 inches single shaft
Plus J Zrs Reactance In Ohms:
225.00
Shaft Type:
Round, slotted single shaft
Alignment Hole Bolt Circle Diameter:
0.8750 inches
Terminal Type And Quantity:
5 screw
Item Name:
Synchro,control Transformer
Cross Referenced Parts
No other part numbers with same form, fit, and function found.
