Technical Specifications of NSN
Body Material:
Steel, stainless
Body Style:
Standard round b
Shoulder Diameter:
1.3120 inches
Pilot Diameter:
0.8750 inches
Overall Length:
2.5020 inches
Flange Diameter:
1.4370 inches
Flange Thickness:
0.0930 inches
Undercut Width:
0.0780 inches
Shaft Diameter:
0.1850 inches single shaft
Shaft Length:
0.5000 inches single shaft
Maximum Tempurature Rise:
60.0 degrees celsius
Stator Input Voltage Rating In Volts:
90.0
Stator Input Current Rating:
24.0 milliamperes
Stator Input Electrical Power Rating:
60.0 milliwatts
Frequency In Hertz:
400.0
Zso Resistance In Ohms:
Between 7800.00 and 9512.00
Zrs Resistance In Ohms:
Between 1050.00 and 1300.00
Phase Shift Angle In Deg:
5.500 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
40.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
60.00
Electrical Error Angular Range In Minutes:
-6.0/+6.0
Spline Tooth Quantity:
21 single shaft
Actuator Friction Torque At Minus 55 Deg Celsius:
0.05 inch-ounces
Alignment Hole Quantity:
4
Pilot Length:
0.0400 inches
Shoulder Length:
0.1320 inches
Mounting Surface To Terminal End Distance:
1.7720 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Length:
0.2000 inches single shaft
Plus J Zso Reactance In Ohms:
Between 77.80 and 84.50
Plus J Zrs Reactance In Ohms:
Between 26.00 and 33.00
Shaft Type:
Spline w/threads single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
0.735 rotor to stator
Alignment Hole Bolt Circle Diameter:
1.1000 inches
Shaft Thread Size:
0.190 inches single shaft
Terminal Type And Quantity:
5 tab w/screw
Item Name:
Synchro,control Transformer
Other Related Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
