Detail Specifications
Body Material:
Steel, corrosion resisting
Body Style:
Standard round b
Shoulder Diameter:
1.0000 inches
Pilot Diameter:
0.6250 inches
Overall Length:
2.3560 inches
Flange Diameter:
1.0620 inches
Flange Thickness:
0.0930 inches
Undercut Width:
0.0620 inches
Shaft Diameter:
0.1872 inches single shaft
Shaft Length:
0.5620 inches single shaft
Maximum Tempurature Rise:
10.0 degrees celsius
Securing Hole Quantity:
4
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
86.0 milliamperes
Stator Input Electrical Power Rating:
150.0 watts
Frequency In Hertz:
Between 396.0 and 404.0
Zso Impedance Magnitude In Ohms:
Between 118.00 and 150.00
Zso Impedance Angle In Deg:
Between 78.00 and 84.00
Zrs Impedance Magnitude In Ohms:
Between 130.00 and 170.00
Zrs Impedance Angle In Deg:
Between 23.00 and 35.00
Phase Shift Angle In Deg:
Between 3.000 input to output and 6.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
15.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
18.00
Electrical Error Angular Range In Minutes:
-7.0/+7.0
Spline Tooth Quantity:
21 single shaft
Actuator Friction Torque At Plus 25 Deg Celsius:
0.07 inch-ounces
Pilot Length:
0.0620 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.7320 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Mounting Facility Screw Thread Series Designator:
Unc
Shaft Thread Length:
0.1970 inches single shaft
Shaft Type:
Spline w/threads single shaft
Mounting Facility Screw Thread Diameter:
0.112 inches
Shaft Thread Size:
0.190 inches single shaft
Test Data Document:
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
5 screw
Item Name:
Synchro,control Transformer
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
