Detail Specifications
Body Material:
Steel, stainless
Body Style:
Standard round a
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
1.6150 inches
Flange Diameter:
Between 0.7450 inches and 0.7500 inches
Flange Thickness:
0.0620 inches
Undercut Diameter:
0.6870 inches
Undercut Width:
0.0620 inches
Shaft Diameter:
0.0895 inches single shaft and 0.0900 inches single shaft
Shaft Length:
0.5500 inches single shaft
Fragility Factor:
Moderately rugged
Maximum Tempurature Rise:
10.0 degrees celsius
Stator Input Voltage Rating In Volts:
10.2
Stator Input Current Rating:
23.0 milliamperes
Stator Input Electrical Power Rating:
0.053 watts
Frequency In Hertz:
400.0
Zso Impedance Magnitude In Ohms:
Between 444.00 and 70.00
Zso Impedance Angle In Deg:
Between 76.00 and 81.00
Zrs Impedance Magnitude In Ohms:
Between 830.00 and 940.00
Zrs Impedance Angle In Deg:
Between 16.00 and 20.00
Phase Shift Angle In Deg:
8.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
25.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Electrical Error Angular Range In Minutes:
-7.0/+7.0
Electrical Error Angular Range In Minutes:
-7.0 to 7.0
Torque Gradient Per Angular Deg:
0.040 inch-ounces
Pilot Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.2400 inches
Shaft Slot Depth:
0.0250 inches single shaft
Shaft Slot Width:
0.0200 inches single shaft
Shaft Type:
Round, slotted single shaft
Transformation Ratio:
2.203 rotor to stator
Test Data Document:
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
5 wire lead
Specification Data:
81349-mil-s-20708/79 government specification
Item Name:
Synchro,control Transformer
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
