Product Technical Spec.
Body Material:
Steel, stainless
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
2.3580 inches
Flange Diameter:
Between 1.0590 inches and 1.0620 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
Between 0.9700 inches and 0.9750 inches
Undercut Width:
0.0500 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.5630 inches single shaft
Stator Input Voltage Rating In Volts:
90.0
Stator Input Current Rating:
17.0 milliamperes
Stator Input Electrical Power Rating:
250.0 milliwatts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
707.00
Zso Resistance In Ohms:
876.00
Zrs Resistance In Ohms:
637.00
Rotor Dc Resistance In Ohms:
370.00
Stator Dc Resistance In Ohms:
602.00
Phase Shift Angle In Deg:
3.400 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
1.00
Electrical Error Angular Range In Minutes:
-7.0/+7.0
Actuator Friction Torque At Minus 55 Deg Celsius:
15.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
3.0 centimeter-grams
Alignment Hole Quantity:
4
Pilot Length:
0.0620 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.7950 inches
Plus J Zro Reactance In Ohms:
3194.00
Shaft Slot Depth:
0.0310 inches single shaft
Plus J Zso Reactance In Ohms:
4580.00
Shaft Slot Width:
0.0310 inches single shaft
Plus J Zrs Reactance In Ohms:
324.00
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
0.735 rotor to stator
Alignment Hole Bolt Circle Diameter:
0.8120 inches
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro,control Transformer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
