Detail Specifications
Body Material:
Steel, stainless
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
0.6250 inches
Overall Length:
2.2380 inches
Flange Diameter:
1.0620 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
0.9800 inches
Undercut Width:
0.0500 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.3760 inches single shaft
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
165.0 milliamperes
Stator Input Electrical Power Rating:
250.0 milliwatts
Frequency In Hertz:
400.0
Zro Impedance Magnitude In Ohms:
418.00
Zro Impedance Angle In Deg:
78.30
Zso Impedance Magnitude In Ohms:
74.30
Zso Impedance Angle In Deg:
79.70
Zrs Impedance Magnitude In Ohms:
104.00
Zrs Impedance Angle In Deg:
26.80
Rotor Dc Resistance In Ohms:
62.10
Stator Dc Resistance In Ohms:
10.00
Phase Shift Angle In Deg:
6.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
30.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
40.00
Electrical Error Angular Range In Minutes:
-7.0/+7.0
Actuator Friction Torque At Minus 55 Deg Celsius:
16.00 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
4.00 centimeter-grams
Alignment Hole Quantity:
4
Pilot Length:
0.0620 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.8620 inches
Shaft Slot Depth:
0.0300 inches single shaft
Shaft Slot Width:
0.0250 inches single shaft
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.1000 inches
Transformation Ratio:
2.203 rotor to stator
Alignment Hole Bolt Circle Diameter:
0.8120 inches
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro,control Transformer
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Number:
ES1607A-3001
Part Number:
ES1607A-3B01
