Product Technical Spec.
Body Material:
Steel, corrosion resisting
Body Style:
Standard round c
Shoulder Diameter:
Between 2.1345 inches and 2.1350 inches
Pilot Diameter:
Between 0.9370 inches and 0.9375 inches
Overall Length:
1.5710 inches
Flange Diameter:
Between 2.2970 inches and 2.3000 inches
Flange Thickness:
Between 0.0590 inches and 0.0650 inches
Undercut Diameter:
Between 2.2090 inches and 2.2150 inches
Undercut Width:
Between 0.0590 inches and 0.0650 inches
Shaft Diameter:
0.2492 inches single shaft and 0.2497 inches single shaft
Shaft Length:
0.5000 inches single shaft
Fragility Factor:
Moderately rugged
Maximum Tempurature Rise:
45.0 degrees celsius
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
7.7 milliamperes
Stator Input Electrical Power Rating:
80.0 milliwatts
Frequency In Hertz:
400.0
Zso Resistance In Ohms:
1495.00
Zrs Resistance In Ohms:
675.00
Phase Shift Angle In Deg:
5.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
10.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
20.00
Electrical Error Angular Range In Minutes:
-1.0/+1.0
Actuator Friction Torque At Minus 55 Deg Celsius:
0.20 inch-ounces
Actuator Friction Torque At Plus 25 Deg Celsius:
0.50 inch-ounces
Pilot Length:
0.0590 mils and 0.0650 centimeters
Shoulder Length:
0.0590 mils and 0.0650 centimeters
Mounting Surface To Terminal End Distance:
0.8370 inches
Shaft Maximum Runout:
0.0010 inches
Plus J Zso Reactance In Ohms:
11870.00
Plus J Zrs Reactance In Ohms:
741.00
Shaft Type:
Round single shaft
Terminal Type And Quantity:
5 screw
Item Name:
Synchro,control Transformer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
