Technical Specifications of NSN
Body Material:
Steel, corrosion resisting
Body Style:
Standard round b
Shoulder Diameter:
Between 1.3070 inches and 1.3120 inches
Pilot Diameter:
Between 0.8745 inches and 0.8750 inches
Overall Length:
3.0830 inches
Flange Diameter:
Between 1.4320 inches and 1.4370 inches
Flange Thickness:
Between 0.0880 inches and 0.0980 inches
Undercut Width:
Between 0.0730 inches and 0.0830 inches
Shaft Diameter:
0.1870 inches and 0.1872 inches single shaft
Shaft Length:
0.5450 inches and 0.5650 inches single shaft
Maximum Tempurature Rise:
10.0 degrees celsius
Stator Input Voltage Rating In Volts:
90.0
Stator Input Current Rating:
13.0 milliamperes
Stator Input Electrical Power Rating:
210.0 milliwatts
Zso Impedance Magnitude In Ohms:
6250.00
Zso Impedance Angle In Deg:
Between 76.00 and 84.00
Zrs Impedance Magnitude In Ohms:
1475.00
Zrs Impedance Angle In Deg:
Between 12.00 and 20.00
Phase Shift Angle In Deg:
9.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
50.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
100.00
Electrical Error Angular Range In Minutes:
-10.0 to 10.0
Spline Tooth Quantity:
21 single shaft
Actuator Friction Torque At Plus 25 Deg Celsius:
0.05 inch-ounces
Alignment Hole Quantity:
4
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0006 inches
Shaft End Play:
Between 0.0005 inches and 0.0015 inches
Pilot Length:
Between 0.0350 inches and 0.0450 inches
Shoulder Length:
Between 0.1070 inches and 0.1270 inches
Mounting Surface To Terminal End Distance:
2.5180 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Shaft Thread Length:
0.2000 inches single shaft
Shaft Type:
Spline w/threads single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
0.735 rotor to stator
Alignment Hole Bolt Circle Diameter:
Between 1.0970 inches and 1.1030 inches
Shaft Thread Size:
0.190 inches single shaft
Shaft Radial Play Determining Weight:
8.0 ounces
Shaft End Play Determining Weight:
16.0 ounces
Terminal Type And Quantity:
5 screw
Item Name:
Synchro,control Transformer
Other Related Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
