Detail Specifications
Body Material:
Steel, corrosion resisting
Body Style:
Standard round a
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
1.6150 inches
Flange Diameter:
Between 0.7450 inches and 0.7500 inches
Flange Thickness:
0.0620 inches
Undercut Diameter:
0.6870 inches
Undercut Width:
0.0620 inches
Shaft Diameter:
0.0898 inches single shaft and 0.0900 inches single shaft
Shaft Length:
0.3750 inches single shaft
Fragility Factor:
Moderately rugged
End Application:
Aircraft, starlifter c-141
Maximum Tempurature Rise:
20.0 degrees celsius
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
108.0 milliamperes
Stator Input Electrical Power Rating:
240.0 milliwatts
Frequency In Hertz:
400.0
Zso Impedance Magnitude In Ohms:
Between 95.00 and 120.00
Zso Impedance Angle In Deg:
Between 74.00 and 79.00
Zrs Impedance Magnitude In Ohms:
Between 35.00 and 48.00
Zrs Impedance Angle In Deg:
Between 15.00 and 20.00
Phase Shift Angle In Deg:
9.500 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
20.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Electrical Error Angular Range In Minutes:
-7.0/+7.0
Actuator Friction Torque At Plus 25 Deg Celsius:
0.04 inch-ounces
Pilot Length:
0.0400 inches
Mounting Surface To Terminal End Distance:
1.2400 inches
Shaft Slot Depth:
0.0250 inches single shaft
Shaft Slot Width:
0.0200 inches single shaft
Shaft Type:
Round, slotted single shaft
Transformation Ratio:
1.154 rotor to stator
Test Data Document:
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
6 wire lead
Specification Data:
81349-mil-s-20708/80 government specification
Item Name:
Synchro,differential Transmitter
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Number:
26V-08CDX4C/80-01C
