Product Technical Spec.
Body Material:
Steel, stainless
Body Style:
Standard round a
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
3.2620 inches
Flange Diameter:
Between 0.9360 inches and 0.9370 inches
Flange Thickness:
Between 0.0330 inches and 0.0430 inches
Undercut Diameter:
Between 0.8350 inches and 0.8450 inches
Undercut Width:
Between 0.0570 inches and 0.0670 inches
Shaft Diameter:
0.0895 inches single shaft and 0.0900 inches single shaft
Maximum Tempurature Rise:
125.0 degrees celsius
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
Between 0.030 amperes and 0.087 amperes
Stator Input Electrical Power Rating:
Between 0.073 watts and 0.210 watts
Frequency In Hertz:
400.0
Rotor Dc Resistance In Ohms:
Between 36.00 and 98.00
Stator Dc Resistance In Ohms:
Between 24.00 and 64.00
Phase Shift Angle In Deg:
Between 8.500 input to output and 9.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
0.030 input
Actuator Friction Torque At Minus 55 Deg Celsius:
30.00 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
10.00 centimeter-grams
Shaft Maximum Radial Play:
0.0005 inches
Shaft End Play:
0.0008 inches
Pilot Length:
0.0330 mils and 0.0430 centimeters
Mounting Surface To Terminal End Distance:
2.7000 inches
Shaft Maximum Runout:
0.0010 inches
Shaft Slot Depth:
0.0250 inches single shaft and 0.0350 inches single shaft
Shaft Slot Width:
0.0150 inches single shaft and 0.0250 inches single shaft
Shaft Type:
Round, slotted single shaft
Transformation Ratio:
Between 1.128 stator to rotor and 1.154 rotor to stator
Terminal Type And Quantity:
12 wire lead
Item Name:
Synchro,differential Receiver
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
