Detail Specifications
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
Between 2.1660 inches and 2.1820 inches
Flange Diameter:
Between 1.0570 inches and 1.0650 inches
Flange Thickness:
Between 0.0900 inches and 0.0960 inches
Undercut Diameter:
Between 0.9700 inches and 0.9750 inches
Undercut Width:
Between 0.0590 inches and 0.0650 inches
Shaft Diameter:
0.1870 inches single shaft and 0.1873 inches single shaft
Shaft Length:
0.4750 inches single shaft and 0.4950 inches single shaft
Stator Input Voltage Rating In Volts:
10.2
Stator Input Current Rating:
35.0 milliamperes
Frequency In Hertz:
400.0
Zro Impedance Magnitude In Ohms:
405.00
Zro Impedance Angle In Deg:
80.00
Zso Impedance Magnitude In Ohms:
316.00
Zso Impedance Angle In Deg:
82.00
Rotor Dc Resistance In Ohms:
75.00
Stator Dc Resistance In Ohms:
31.20
Phase Shift Angle In Deg:
5.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
20.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
25.00
Electrical Error Angular Range In Minutes:
-5.5/+5.5
Actuator Friction Torque At Minus 55 Deg Celsius:
40.00 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
20.00 centimeter-grams
Torque Gradient Per Angular Deg:
214.000 millimeter-milligrams
Alignment Hole Quantity:
4
Pilot Length:
Between 0.0590 inches and 0.0650 inches
Shoulder Length:
Between 0.0590 inches and 0.0650 inches
Mounting Surface To Terminal End Distance:
1.6910 inches
Shaft Slot Depth:
0.0310 inches single shaft
Shaft Slot Width:
0.0310 inches single shaft
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.0125 inches
Transformation Ratio:
1.200 rotor to stator
Alignment Hole Bolt Circle Diameter:
1.0350 inches
Terminal Type And Quantity:
6 wire lead
Item Name:
Synchro,differential Transmitter
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
