Detail Specifications
Body Material:
Steel, corrosion resisting
Body Style:
Standard round b
Shoulder Diameter:
Between 0.8118 inches and 0.8123 inches
Pilot Diameter:
Between 0.5000 inches and 0.5005 inches
Overall Length:
1.6650 inches
Flange Diameter:
Between 0.9360 inches and 0.9370 inches
Flange Thickness:
Between 0.0580 inches and 0.0680 inches
Undercut Width:
Between 0.0570 inches and 0.0670 inches
Shaft Diameter:
0.0895 inches single shaft and 0.0900 inches single shaft
Shaft Length:
0.3370 inches single shaft
Fragility Factor:
Moderately rugged
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
100.0 milliamperes
Stator Input Electrical Power Rating:
250.0 milliwatts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
Between 28.90 and 39.10
Rotor Dc Resistance In Ohms:
Between 28.80 and 35.20
Stator Dc Resistance In Ohms:
Between 22.50 and 27.50
Phase Shift Angle In Deg:
10.200 output to input
Maximum Fundamental Null Voltage In Millivolts Per Volt:
60.00 output
Actuator Friction Torque At Minus 55 Deg Celsius:
9.00 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
3.00 centimeter-grams
Pilot Length:
Between 0.0350 inches and 0.0450 inches
Shoulder Length:
Between 0.0570 inches and 0.0670 inches
Mounting Surface To Terminal End Distance:
1.1900 inches
Shaft Maximum Runout:
0.0010 inches
Plus J Zro Reactance In Ohms:
Between 107.10 and 130.90
Shaft Slot Depth:
0.1880 inches single shaft
Shaft Slot Width:
0.1250 inches single shaft
Shaft Type:
Round, slotted single shaft
Transformation Ratio:
Between 1.028 rotor to stator and 1.090 rotor to stator
Test Data Document:
10001-2325877 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
6 wire lead
Item Name:
Synchro,differential Transmitter
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
