Detail Specifications
Body Material:
Steel, corrosion resisting
Body Style:
Standard round a
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
Between 1.6430 inches and 1.6680 inches
Flange Diameter:
Between 0.7470 inches and 0.7500 inches
Flange Thickness:
0.0620 inches
Undercut Diameter:
Between 0.6880 inches and 0.6910 inches
Undercut Width:
0.0620 inches
Shaft Diameter:
0.0895 inches single shaft and 0.0900 inches single shaft
Shaft Length:
0.4030 inches single shaft and 0.4280 inches single shaft
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
108.0 milliamperes
Stator Input Electrical Power Rating:
240.0 milliwatts
Frequency In Hertz:
400.0
Zso Impedance Magnitude In Ohms:
107.50
Zso Impedance Angle In Deg:
76.50
Zrs Impedance Magnitude In Ohms:
41.50
Zrs Impedance Angle In Deg:
17.50
Phase Shift Angle In Deg:
Between 8.000 input to output and 11.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
20.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Electrical Error Angular Range In Minutes:
-5.0/+5.0
Electrical Error Angular Range In Minutes:
-5.0 to 5.0
Actuator Friction Torque At Minus 55 Deg Celsius:
4.03 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
2.88 centimeter-grams
Pilot Length:
Between 0.0380 inches and 0.0430 inches
Mounting Surface To Terminal End Distance:
1.2400 inches
Shaft Slot Depth:
0.0150 inches single shaft and 0.0250 inches single shaft
Shaft Slot Width:
0.0200 inches single shaft and 0.0300 inches single shaft
Shaft Type:
Round, slotted single shaft
Transformation Ratio:
Between 1.131 rotor to stator and 1.177 rotor to stator
Terminal Type And Quantity:
6 wire lead
Item Name:
Synchro,differential Transmitter
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
