Product Technical Spec.
Body Material:
Steel, stainless
Body Style:
Standard round d
Shoulder Diameter:
Between 2.6950 inches and 2.7000 inches
Pilot Diameter:
0.5000 inches
Second Shoulder Diameter:
Between 2.7490 inches and 2.7500 inches
Second Shoulder Length:
0.3750 inches
Overall Length:
5.3550 inches
Flange Diameter:
Between 3.0990 inches and 3.1000 inches
Flange Thickness:
0.2500 inches
Body Diameter:
2.7000 centimeters
Shaft Diameter:
0.2403 inches single shaft and 0.2405 inches single shaft
Shaft Length:
0.7300 inches single shaft
Fragility Factor:
Moderately rugged
Maximum Tempurature Rise:
20.0 degrees celsius
Stator Input Voltage Rating In Volts:
90.0
Stator Input Current Rating:
190.0 milliamperes
Stator Input Electrical Power Rating:
10.2 watts
Frequency In Hertz:
400.0
Zrs Impedance Magnitude In Ohms:
4.80
Zrs Impedance Angle In Deg:
44.00
Rotor Dc Resistance In Ohms:
1.20
Stator Dc Resistance In Ohms:
1.00
Phase Shift Angle In Deg:
1.500 input to output
Electrical Error Angular Range In Minutes:
-8.0/+8.0
Spline Tooth Quantity:
22 single shaft
Actuator Friction Torque At Plus 25 Deg Celsius:
0.50 inch-ounces
Torque Gradient Per Angular Deg:
0.600 inch-ounces
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0008 inches
Shaft End Play:
0.0030 inches
Pilot Length:
0.0300 inches
Shoulder Length:
0.6150 inches
Aft Of First Flange Diameter:
2.7500 inches
Mounting Surface To Terminal End Distance:
4.6250 inches
Spline Tooth Diametral Pitch:
96 single shaft
Shaft Maximum Runout:
0.0008 inches
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Shaft Thread Length:
0.3640 inches single shaft
Shaft Type:
Spline w/threads single shaft
Transformation Ratio:
1.154 rotor to stator
Shaft Thread Size:
0.2500 inches single shaft
Shaft Radial Play Determining Weight:
16.0 ounces
Shaft End Play Determining Weight:
16.0 ounces
Test Data Document:
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
6 screw
Specification Data:
81349-mil-s-20708/64 government specification
Item Name:
Synchro,differential Transmitter
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
