Product Technical Spec.
Body Material:
Any acceptable
Body Style:
Standard round c
Shoulder Diameter:
Between 1.3117 inches and 1.3120 inches
Pilot Diameter:
Between 0.8745 inches and 0.8750 inches
Overall Length:
Between 2.2730 inches and 2.4030 inches
Flange Diameter:
Between 1.4360 inches and 1.4370 inches
Flange Thickness:
Between 0.0900 inches and 0.0960 inches
Undercut Diameter:
Between 1.3090 inches and 1.3150 inches
Undercut Width:
0.0780 inches
Shaft Diameter:
0.1248 inches single shaft and 0.1250 inches single shaft
Shaft Length:
0.3810 inches single shaft and 0.4490 inches single shaft
Stator Input Voltage Rating In Volts:
Between 30.0 and 45.0
Stator Input Current Rating:
45.0 milliamperes
Frequency In Hertz:
400.0
Rotor Dc Resistance In Ohms:
Between 180.00 and 220.00
Stator Dc Resistance In Ohms:
Between 265.50 and 324.50
Compensation Method:
Resistor compensated
Compensator Dc Resistance In Ohms:
Between 265.50 and 324.50
Compensator Transformation Ratio In Percent:
15.000 rotor to compensator
Phase Shift Angle In Deg:
Between 4.000 input to output and 8.000 input to output
Interaxis Error Angular Range In Minutes:
-5.0/+5.0
Output Voltage Functional Error Range In Percent:
-0.1/+0.1
Electrical Error Angular Range In Minutes:
-5.0/+5.0
Pilot Length:
Between 0.0370 inches and 0.0430 inches
Shoulder Length:
Between 0.1290 inches and 0.1350 inches
Mounting Surface To Terminal End Distance:
Between 1.8920 inches and 1.9540 inches
Transformation Ratio:
Between 0.960 rotor to stator and 1.000 rotor to stator
Terminal Type And Quantity:
12 tab, solder lug
Item Name:
Resolver,sine-cosine
Cross Referenced Parts
No other part numbers with same form, fit, and function found.
