Detail Specifications
Body Material:
Any acceptable
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
Between 2.3360 inches and 2.3600 inches
Flange Diameter:
Between 1.0570 inches and 1.0650 inches
Flange Thickness:
Between 0.0900 inches and 0.0960 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
0.0500 inches
Shaft Diameter:
0.1245 inches single shaft and 0.1247 inches single shaft
Shaft Length:
0.3660 inches single shaft and 0.3900 inches single shaft
Securing Hole Quantity:
4
Rotor Input Voltage Rating In Volts:
29.0
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
Between 412.25 and 557.75
Zso Resistance In Ohms:
Between 363.80 and 472.20
Rotor Dc Resistance In Ohms:
Between 263.50 and 356.50
Stator Dc Resistance In Ohms:
Between 289.00 and 391.00
Compensation Method:
Winding compensated
Compensator Dc Resistance In Ohms:
Between 318.75 and 431.25
Phase Shift Angle In Deg:
Between 5.500 input to output and 11.500 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
0.70
Output Voltage Functional Error Range In Percent:
-0.1/+0.1
Electrical Error Angular Range In Minutes:
-5.0/+5.0
Actuator Friction Torque At Minus 55 Deg Celsius:
16.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
4.0 centimeter-grams
Pilot Length:
0.0590 mils and 0.0650 centimeters
Shoulder Length:
0.0590 mils and 0.0650 centimeters
Mounting Surface To Terminal End Distance:
1.9700 inches
Mounting Facility Screw Thread Series Designator:
Unc
Plus J Zro Reactance In Ohms:
1717.00
Plus J Zso Reactance In Ohms:
Between 1725.50 and 2304.50
Shaft Type:
Round single shaft
Alignment Hole Depth:
0.1250 inches
Mounting Facility Screw Thread Diameter:
0.112 inches
Alignment Hole Bolt Circle Diameter:
Between 0.8090 inches and 0.8150 inches
Terminal Type And Quantity:
12 screw
Item Name:
Resolver,sine-cosine
Manufacturer Part Numbers
No other part numbers with same form, fit, and function found.
