Technical Specifications of NSN
Body Material:
Steel, corrosion resisting
Body Style:
Standard round b
Shoulder Diameter:
1.3120 inches
Pilot Diameter:
0.8500 inches
Overall Length:
2.7110 inches
Flange Diameter:
1.4370 inches
Flange Thickness:
0.0930 inches
Undercut Width:
0.0780 inches
Shaft Diameter:
0.1872 inches single shaft
Shaft Length:
0.5000 inches single shaft
Schematic Diagram Designator:
D15 2 rotor, 1 stator, 1 compensator
Schematic Diagram Designator:
2 rotor, 1 stator, 1 compensator
Fragility Factor:
Moderately rugged
Stator Input Voltage Rating In Volts:
30.0
Stator Input Current Rating:
135.0 milliamperes
Stator Input Electrical Power Rating:
700.0 milliwatts
Frequency In Hertz:
1000.0
Zro Impedance Magnitude In Ohms:
200.00
Zro Impedance Angle In Deg:
81.00
Rotor Dc Resistance In Ohms:
12.00
Stator Dc Resistance In Ohms:
16.00
Compensation Method:
Winding compensated
Compensator Dc Resistance In Ohms:
32.00
Phase Shift Angle In Deg:
4.200 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
20.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Interaxis Error Angular Range In Minutes:
-5.0/+5.0
Electrical Error Angular Range In Minutes:
-7.0/+7.0
Spline Tooth Quantity:
21 single shaft
Actuator Friction Torque At Plus 25 Deg Celsius:
4.0 centimeter-grams
Alignment Hole Quantity:
4
Shaft Maximum Radial Play:
0.0008 inches
Shaft End Play:
Between 0.0005 inches and 0.0015 inches
Terminal Designator And Schematic Position:
Connection r1 position c and connection r2 position j and connection r3 position d and connection r4 position g and connection s1 position a and connection s3 position b and connection c1 position k and connection c2 position l
Pilot Length:
0.0400 inches
Shoulder Length:
0.1320 inches
Mounting Surface To Terminal End Distance:
2.0510 inches
Spline Tooth Diametral Pitch:
175 single shaft
Shaft Maximum Runout:
0.0010 inches
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Shaft Thread Length:
0.2000 inches single shaft
Shaft Type:
Spline w/threads single shaft
Alignment Hole Depth:
0.1870 inches
Transformation Ratio:
1.000 rotor to stator
Alignment Hole Bolt Circle Diameter:
1.1000 inches
Shaft Thread Size:
0.185 inches single shaft
Terminal Type And Quantity:
12 screw
Item Name:
Tandem Brushless Resolver
Other Related Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
