Detail Specifications
Body Material:
Steel, corrosion resisting
Body Style:
Standard round c
Shoulder Diameter:
1.0000 inches
Pilot Diameter:
0.6250 inches
Overall Length:
2.5550 inches
Flange Diameter:
1.0620 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
0.0620 inches
Shaft Diameter:
0.1872 inches single shaft
Shaft Length:
0.4930 inches single shaft
Stator Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Zso Resistance In Ohms:
428.00
Zro Impedance Magnitude In Ohms:
2080.00
Zro Impedance Angle In Deg:
76.50
Rotor Dc Resistance In Ohms:
420.00
Stator Dc Resistance In Ohms:
305.00
Transformation Ratio Equality In Percent:
0.1
Compensation Method:
Winding compensated
Compensator Transformation Ratio In Percent:
0.990 rotor to compensator
Phase Shift Angle In Deg:
8.500 output to input
Maximum Fundamental Null Voltage In Millivolts Per Volt:
10.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
10.00
Output Voltage Functional Error Range In Percent:
-0.1/+0.1
Spline Tooth Quantity:
21 single shaft
Actuator Friction Torque At Minus 55 Deg Celsius:
16.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
4.0 centimeter-grams
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0005 inches
Shaft End Play:
Between 0.0005 inches and 0.0015 inches
Pilot Length:
0.0620 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
2.0000 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Maximum Runout:
0.0008 inches
Plus J Zso Reactance In Ohms:
1960.00
Shaft Type:
Pinion single shaft
Transformation Ratio:
0.975 rotor to stator
Terminal Type And Quantity:
12 tab w/screw
Item Name:
Resolver,sine-cosine
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
