Product Technical Spec.
Body Material:
Steel, stainless
Body Style:
Standard round c
Shoulder Diameter:
Between 0.8118 inches and 0.8123 inches
Pilot Diameter:
0.5000 inches
Overall Length:
1.9130 inches
Flange Diameter:
Between 0.9350 inches and 0.9380 inches
Flange Thickness:
Between 0.0570 inches and 0.0670 inches
Undercut Diameter:
0.8400 inches
Undercut Width:
0.0570 inches
Shaft Diameter:
0.0898 inches both shafts
Shaft Length:
0.2190 inches rear shaft
Shaft Length:
0.4130 inches front shaft
Stator Input Voltage Rating In Volts:
10.2
Stator Input Current Rating:
90.0 milliamperes
Stator Input Electrical Power Rating:
600.0 milliwatts
Rotor Input Voltage Rating In Volts:
10.2
Frequency In Hertz:
400.0
Rotor Input Current Rating:
90.0 milliamperes
Rotor Input Electrical Power Rating:
600.0 milliwatts
Zro Resistance In Ohms:
Between 56.00 and 84.00
Zso Resistance In Ohms:
Between 44.80 and 67.20
Rotor Dc Resistance In Ohms:
Between 72.90 and 89.10
Stator Dc Resistance In Ohms:
Between 39.60 and 48.40
Phase Shift Angle In Deg:
Between 18.000 input to output and 28.000 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
60.00
Electrical Error Angular Range In Minutes:
-18.0/+18.0
Actuator Friction Torque At Minus 55 Deg Celsius:
30.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
10.0 centimeter-grams
Pilot Length:
0.0380 inches
Shoulder Length:
Between 0.0570 inches and 0.0670 inches
Mounting Surface To Terminal End Distance:
1.2810 inches
Plus J Zro Reactance In Ohms:
Between 111.35 and 150.65
Shaft Slot Depth:
0.0300 inches both shafts
Plus J Zso Reactance In Ohms:
Between 150.45 and 203.55
Shaft Slot Width:
0.0200 inches both shafts
Shaft Type:
Round single shaft
Transformation Ratio:
Between 0.965 rotor to stator and 1.015 rotor to stator
Terminal Type And Quantity:
7 tab, solder lug
Item Name:
Tandem Brushless Resolver
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
