Detail Specifications
Body Material:
Steel, stainless
Body Style:
Standard round b
Shoulder Diameter:
Between 0.9997 inches and 1.0000 inches
Pilot Diameter:
Between 0.6247 inches and 0.6250 inches
Overall Length:
Between 2.3580 inches and 2.3730 inches
Flange Diameter:
Between 1.0610 inches and 1.0620 inches
Flange Thickness:
0.0930 inches
Undercut Width:
0.0500 inches
Shaft Diameter:
0.1190 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.5380 inches single shaft
Stator Input Voltage Rating In Volts:
22.0
Stator Input Current Rating:
Between 4.5 milliamperes and 10.0 milliamperes
Stator Input Electrical Power Rating:
6.7 milliwatts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
500.00
Zso Resistance In Ohms:
360.00
Rotor Dc Resistance In Ohms:
425.00
Stator Dc Resistance In Ohms:
280.00
Transformation Ratio Equality In Percent:
0.2
Compensation Method:
Resistor compensated
Zco Resistance In Ohms:
480.00
Compensator Dc Resistance In Ohms:
430.00
Compensator Transformation Ratio In Percent:
1.007 rotor to compensator
Phase Shift Angle In Deg:
7.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
8.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
10.00
Interaxis Error Angular Range In Minutes:
-3.0/+3.0
Electrical Error Angular Range In Minutes:
-3.5/+3.5
Electrical Error Angular Range In Minutes:
-3.5 to 3.5
Actuator Friction Torque At Minus 55 Deg Celsius:
16.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
4.0 centimeter-grams
Alignment Hole Quantity:
4
Pilot Length:
0.0620 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
Between 1.8200 inches and 1.8350 inches
Plus J Zro Reactance In Ohms:
2325.00
Shaft Slot Depth:
0.0320 inches single shaft
Plus J Zso Reactance In Ohms:
2200.00
Shaft Slot Width:
0.0220 inches single shaft
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
0.980 rotor to stator
Plus J Zco Reactance In Ohms:
2200.00
Alignment Hole Bolt Circle Diameter:
0.8120 inches
Terminal Type And Quantity:
12 screw
Item Name:
Tandem Brushless Resolver
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
