Product Technical Spec.
Body Material:
Steel, corrosion resisting
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
2.5080 inches
Flange Diameter:
Between 1.0570 inches and 1.0650 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
0.0500 inches
Shaft Diameter:
0.1850 inches single shaft and 0.1870 inches single shaft
Shaft Length:
0.6170 inches single shaft
Rotor Input Voltage Rating In Volts:
0.2
Frequency In Hertz:
135.0
Rotor Input Current Rating:
3.0 milliamperes
Zro Resistance In Ohms:
50.00
Zso Resistance In Ohms:
640.00
Zrs Resistance In Ohms:
76.00
Rotor Dc Resistance In Ohms:
47.00
Stator Dc Resistance In Ohms:
565.00
Transformation Ratio Equality In Percent:
0.1
Phase Shift Angle In Deg:
28.000 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
2.00
Electrical Error Angular Range In Minutes:
-5.0/+5.0
Spline Tooth Quantity:
21 single shaft
Actuator Friction Torque At Minus 55 Deg Celsius:
20.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
10.0 centimeter-grams
Alignment Hole Quantity:
4
Pilot Length:
0.0620 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.8510 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Shaft Thread Length:
0.3170 inches single shaft
Plus J Zro Reactance In Ohms:
87.00
Plus J Zso Reactance In Ohms:
1224.00
Plus J Zrs Reactance In Ohms:
235.00
Shaft Type:
Spline w/threads single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
3.000 rotor to stator
Alignment Hole Bolt Circle Diameter:
0.8120 inches
Shaft Thread Size:
0.190 inches single shaft
Terminal Type And Quantity:
7 screw
Item Name:
Resolver,sine-cosine
Cross Referenced Parts
No other part numbers with same form, fit, and function found.