Technical Specifications of NSN
Body Material:
Steel, corrosion resisting
Body Style:
Standard round, rotatable housing
Shoulder Diameter:
Between 1.9900 inches and 1.9930 inches
Overall Length:
4.9010 inches
Flange Diameter:
Between 2.2495 inches and 2.2500 inches
Flange Thickness:
Between 0.2470 inches and 0.2530 inches
Body Diameter:
1.9060 inches
Shaft Diameter:
0.2470 inches single shaft
Shaft Length:
0.7190 inches single shaft
Schematic Diagram Designator:
D1 2 rotor, 2 stator
Schematic Diagram Designator:
2 rotor, 2 stator
Stator Input Voltage Rating In Volts:
20.0
Rotor Input Voltage Rating In Volts:
20.0
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
110.00
Zso Resistance In Ohms:
22.00
Zrs Resistance In Ohms:
123.00
Rotor Dc Resistance In Ohms:
120.00
Stator Dc Resistance In Ohms:
130.00
Phase Shift Angle In Deg:
Between 0.800 input to output and 1.600 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
30.00 input
Maximum Total Null Voltage Output In Millivolts Per Volt:
70.00
Electrical Error Angular Range In Minutes:
-7.0/+7.0
Spline Tooth Quantity:
106 single shaft
Actuator Friction Torque At Minus 55 Deg Celsius:
5.00 inch-ounces
Actuator Friction Torque At Plus 25 Deg Celsius:
1.00 inch-ounces
Shoulder Length:
0.4100 inches
Mounting Surface To Terminal End Distance:
3.4630 inches
Spline Tooth Diametral Pitch:
48 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Shaft Thread Length:
0.3250 inches single shaft
Plus J Zro Reactance In Ohms:
520.00
Plus J Zso Reactance In Ohms:
123.00
Plus J Zrs Reactance In Ohms:
53.00
Shaft Type:
Spline w/threads single shaft
Transformation Ratio:
1.000 rotor to stator
Shaft Thread Size:
0.190 inches single shaft
Test Data Document:
03538-7753719+1 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
8 screw
Item Name:
Tandem Brushless Resolver
Other Related Parts
No other part numbers with same form, fit, and function found.
