Detail Specifications
Body Material:
Steel, stainless
Body Style:
Standard round c
Shoulder Diameter:
Between 0.8118 inches and 0.8123 inches
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
1.6540 inches
Flange Diameter:
Between 0.9360 inches and 0.9370 inches
Flange Thickness:
0.0625 inches
Undercut Diameter:
Between 0.8350 inches and 0.8400 inches
Undercut Width:
0.0625 inches
Shaft Diameter:
0.0880 inches single shaft and 0.0900 inches single shaft
Shaft Length:
0.3750 inches single shaft
Schematic Diagram Designator:
1 rotor, 2 stator
Fragility Factor:
Moderately rugged
Stator Input Voltage Rating In Volts:
5.0
Stator Input Current Rating:
2.8 milliamperes
Stator Input Electrical Power Rating:
3.6 milliwatts
Frequency In Hertz:
400.0
Zso Resistance In Ohms:
457.00
Rotor Dc Resistance In Ohms:
364.00
Stator Dc Resistance In Ohms:
304.00
Phase Shift Angle In Deg:
10.000 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
40.00
Electrical Error Angular Range In Minutes:
-30.0/+30.0
Actuator Friction Torque At Minus 55 Deg Celsius:
30.00 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
10.00 centimeter-grams
Alignment Hole Quantity:
3
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0008 inches
Shaft End Play:
Between 0.0001 inches and 0.0005 inches
Terminal Designator And Schematic Position:
Connection r1 position a and connection r2 position b and connection r3 position c and connection s1 position h and connection s2 position e and connection s3 position j and connection s4 position f
Pilot Length:
0.0380 inches
Shoulder Length:
0.0625 inches
Mounting Surface To Terminal End Distance:
1.2410 inches
Shaft Maximum Runout:
0.0010 inches
Shaft Slot Depth:
0.0934 inches single shaft
Plus J Zso Reactance In Ohms:
1727.00
Shaft Slot Width:
0.0200 inches single shaft
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.0781 inches
Transformation Ratio:
0.767 stator to rotor
Alignment Hole Bolt Circle Diameter:
Between 0.6750 inches and 0.6810 inches
Shaft Radial Play Determining Weight:
1.4 ounces
Shaft End Play Determining Weight:
3.0 ounces
Terminal Type And Quantity:
7 wire lead
Item Name:
Tandem Brushless Resolver
Manufacturer Part Numbers
No other part numbers with same form, fit, and function found.
