Detail Specifications
Body Material:
Steel, stainless
Body Style:
Standard round a
Pilot Diameter:
0.5000 inches
Overall Length:
1.6300 inches
Flange Diameter:
0.7500 inches
Flange Thickness:
0.0620 inches
Undercut Diameter:
0.6910 inches
Undercut Width:
0.0620 inches
Shaft Diameter:
0.1200 inches single shaft
Shaft Length:
0.3350 inches single shaft
Fragility Factor:
Moderately rugged
Stator Input Voltage Rating In Volts:
10.0
Frequency In Hertz:
400.0
Zso Resistance In Ohms:
615.00
Zrs Resistance In Ohms:
995.00
Transformation Ratio Equality In Percent:
0.001
Compensation Method:
Resistor compensated and winding compensated
Compensator Dc Resistance In Ohms:
200000.00
Compensator Transformation Ratio In Percent:
2.002 rotor to compensator
Maximum Fundamental Null Voltage In Millivolts Per Volt:
20.00 input
Maximum Total Null Voltage Output In Millivolts Per Volt:
24.00
Interaxis Error Angular Range In Minutes:
-5.0/+5.0
Output Voltage Functional Error Range In Percent:
-0.1/+0.1
Actuator Friction Torque At Minus 55 Deg Celsius:
9.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
5.0 centimeter-grams
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0008 inches
Shaft End Play:
Between 0.0005 inches and 0.0015 inches
Terminal Designator And Schematic Position:
Connection r1 position a and connection r2 position c and connection r3 position b and connection s1 position h and connection s2 position e and connection s3 position g and connection s4 position f and connection c1 position m and connection c2 position j and connection c3 position l and connection c4 position k
Pilot Length:
0.0400 inches
Mounting Surface To Terminal End Distance:
1.2400 inches
Shaft Maximum Runout:
0.0010 inches
Shaft Slot Depth:
0.0300 inches single shaft
Plus J Zso Reactance In Ohms:
1930.00
Shaft Slot Width:
0.0250 inches single shaft
Plus J Zrs Reactance In Ohms:
350.00
Shaft Type:
Round, slotted, undercut single shaft
Transformation Ratio:
0.980 rotor to stator
Shaft Tip Length:
0.0850 inches single shaft
Shaft Undercut Diameter:
0.1040 inches single shaft
Shaft Radial Play Determining Weight:
4.0 ounces
Shaft End Play Determining Weight:
8.0 ounces
Terminal Type And Quantity:
9 wire lead
Item Name:
Resolver,brushless,differential,electrical
Manufacturer Part Numbers
No other part numbers with same form, fit, and function found.
