Product Technical Spec.
Body Material:
Steel, corrosion resisting
Body Style:
Standard round c
Shoulder Diameter:
Between 0.8118 inches and 0.8123 inches
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
1.8430 inches
Flange Diameter:
Between 0.9360 inches and 0.9370 inches
Flange Thickness:
0.0630 inches
Undercut Diameter:
0.8400 inches
Undercut Width:
0.0620 inches
Shaft Diameter:
0.0895 inches single shaft and 0.9000 inches single shaft
Shaft Length:
0.5620 inches single shaft
Stator Input Voltage Rating In Volts:
26.0
Stator Input Current Rating:
32.0 milliamperes
Stator Input Electrical Power Rating:
220.0 milliwatts
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
38.0 milliamperes
Rotor Input Electrical Power Rating:
350.0 milliwatts
Zro Resistance In Ohms:
250.00
Zso Resistance In Ohms:
212.00
Zrs Resistance In Ohms:
320.00
Rotor Dc Resistance In Ohms:
215.00
Stator Dc Resistance In Ohms:
166.00
Phase Shift Angle In Deg:
18.000 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
26.00
Electrical Error Angular Range In Minutes:
-15.0/+15.0
Actuator Friction Torque At Minus 55 Deg Celsius:
16.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
4.0 centimeter-grams
Alignment Hole Quantity:
3
Pilot Length:
0.0380 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.2810 inches
Plus J Zro Reactance In Ohms:
630.00
Shaft Slot Depth:
0.0250 inches single shaft and 0.0300 inches single shaft
Plus J Zso Reactance In Ohms:
783.00
Shaft Slot Width:
0.0150 inches single shaft and 0.0200 inches single shaft
Plus J Zrs Reactance In Ohms:
70.00
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.0500 inches
Alignment Hole Bolt Circle Diameter:
0.6780 inches
Terminal Type And Quantity:
7 wire lead
Item Name:
Resolver,sine-cosine
Cross Referenced Parts
No other part numbers with same form, fit, and function found.