Detail Specifications
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9997 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
2.4620 inches
Flange Diameter:
Between 1.0570 inches and 1.0750 inches
Flange Thickness:
Between 0.0900 inches and 0.0960 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
Between 0.0570 inches and 0.0670 inches
Shaft Diameter:
0.1870 inches single shaft and 0.1872 inches single shaft
Shaft Length:
0.4610 inches single shaft and 0.4750 inches single shaft
Maximum Tempurature Rise:
20.0 degrees celsius
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
145.0 milliamperes
Rotor Input Electrical Power Rating:
760.0 milliwatts
Zro Resistance In Ohms:
36.00
Zso Resistance In Ohms:
7.00
Zrs Resistance In Ohms:
38.50
Zss Resistance In Ohms:
9.30
Phase Shift Angle In Deg:
7.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
20.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Actuator Friction Torque At Minus 55 Deg Celsius:
25.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
15.0 centimeter-grams
Alignment Hole Quantity:
4
Pilot Length:
Between 0.0590 inches and 0.0650 inches
Shoulder Length:
Between 0.0590 inches and 0.0650 inches
Mounting Surface To Terminal End Distance:
1.8600 inches
Plus J Zro Reactance In Ohms:
175.00
Plus J Zso Reactance In Ohms:
41.50
Plus J Zrs Reactance In Ohms:
17.80
Shaft Type:
Round single shaft
Alignment Hole Depth:
0.1250 inches
Plus J Zss Reactance In Ohms:
4.70
Transformation Ratio:
0.454 stator to rotor
Alignment Hole Bolt Circle Diameter:
0.8120 inches
Test Data Document:
81349-mil-r-21530 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
8 screw
Item Name:
Tandem Brushless Resolver
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
