Technical Specifications of NSN
Body Material:
Steel, corrosion resisting
Body Style:
Standard round b
Shoulder Diameter:
1.3120 inches
Pilot Diameter:
0.8750 inches
Overall Length:
2.8050 inches
Flange Diameter:
1.4370 inches
Flange Thickness:
0.0930 inches
Undercut Width:
0.0780 inches
Shaft Diameter:
0.1872 inches single shaft
Shaft Length:
0.5000 inches single shaft
Fragility Factor:
Moderately rugged
Maximum Tempurature Rise:
30.0 degrees celsius
Stator Input Voltage Rating In Volts:
32.0
Stator Input Current Rating:
57.0 milliamperes
Stator Input Electrical Power Rating:
270.0 milliwatts
Frequency In Hertz:
400.0
Zso Impedance Magnitude In Ohms:
575.00
Zso Impedance Angle In Deg:
81.00
Rotor Dc Resistance In Ohms:
57.00
Stator Dc Resistance In Ohms:
15.00
Transformation Ratio Equality In Percent:
0.2
Phase Shift Angle In Deg:
5.700 output to input
Maximum Fundamental Null Voltage In Millivolts Per Volt:
0.707 input
Maximum Total Null Voltage Output In Millivolts Per Volt:
0.884
Interaxis Error Angular Range In Minutes:
-1.0/+1.0
Output Voltage Functional Error Range In Percent:
-0.2/+0.2
Electrical Error Angular Range In Minutes:
-2.0/+2.0
Spline Tooth Quantity:
21 single shaft
Actuator Friction Torque At Minus 55 Deg Celsius:
0.60 inch-ounces
Actuator Friction Torque At Plus 25 Deg Celsius:
0.20 inch-ounces
Alignment Hole Quantity:
4
Shaft Maximum Radial Play:
0.0004 inches
Shaft End Play:
0.0015 inches
Terminal Designator And Schematic Position:
Connection r1 position e and connection r2 position f and connection r3 position c and connection s1 position b and connection s2 position c and connection s3 position a
Pilot Length:
0.0400 inches
Shoulder Length:
0.1320 inches
Mounting Surface To Terminal End Distance:
1.9300 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Maximum Runout:
0.0010 inches
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Shaft Thread Length:
0.2000 inches single shaft
Shaft Type:
Spline w/threads single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
0.450 rotor to stator
Alignment Hole Bolt Circle Diameter:
1.1000 inches
Shaft Thread Size:
0.190 inches single shaft
Shaft End Play Determining Weight:
8.0 ounces
Terminal Type And Quantity:
6 solder stud
Item Name:
Tandem Brushless Resolver
Other Related Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
