Product Features
Spur gear
Technical Specifications of NSN
Body Material:
Steel, corrosion resisting
Body Style:
Standard round, rotatable stator b
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
0.9750 inches
Flange Diameter:
Between 0.0450 inches and 0.0550 inches
Flange Thickness:
Between 0.0900 inches and 0.0960 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
Between 0.0450 inches and 0.0550 inches
Body Diameter:
1.0590 mils and 1.0670 centimeters
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.4290 inches single shaft and 0.4510 inches single shaft
Fragility Factor:
Moderately rugged
Maximum Tempurature Rise:
10.0 degrees celsius
Rotor Input Voltage Rating In Volts:
15.0
Frequency In Hertz:
400.0
Zro Impedance Magnitude In Ohms:
500000.00
Zso Impedance Magnitude In Ohms:
500.00
Zso Impedance Angle In Deg:
35.00
Transformation Ratio Equality In Percent:
0.1
Compensation Method:
Winding compensated
Phase Shift Angle In Deg:
0.100 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
20.00 input
Maximum Total Null Voltage Output In Millivolts Per Volt:
25.00
Interaxis Error Angular Range In Minutes:
-3.0/+3.0
Output Voltage Functional Error Range In Percent:
-0.1/+0.1
Electrical Error Angular Range In Minutes:
-3.0/+3.0
Actuator Friction Torque At Minus 55 Deg Celsius:
30.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
15.0 centimeter-grams
Alignment Hole Quantity:
4
Shaft Radial Play Test Point:
0.250 inches
Shaft Maximum Radial Play:
0.0008 inches
Shaft End Play:
Between 0.0005 inches and 0.0015 inches
Terminal Designator And Schematic Position:
Connection r1 position h and connection r2 position g and connection r3 position e and connection r4 position j and connection s1 position l and connection s2 position l and connection s3 position k and connection s4 position n and connection c1 position d and connection c2 position c and connection c3 position a and connection c4 position b
Pilot Length:
0.0590 mils and 0.0650 centimeters
Shoulder Length:
0.0590 mils and 0.0650 centimeters
Mounting Surface To Terminal End Distance:
2.9660 inches
Shaft Maximum Runout:
0.0010 inches
Shaft Type:
Round single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
1.000 rotor to stator
Alignment Hole Bolt Circle Diameter:
0.8120 inches
Shaft Radial Play Determining Weight:
4.0 ounces
Shaft End Play Determining Weight:
8.0 ounces
Terminal Type And Quantity:
12 wire lead
Item Name:
Resolver,sine-cosine
Other Related Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
