Product Technical Spec.
Body Material:
Any acceptable
Body Style:
Standard round a
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
Between 1.6070 inches and 1.6450 inches
Flange Diameter:
Between 0.7470 inches and 0.7500 inches
Flange Thickness:
Between 0.0590 inches and 0.0650 inches
Undercut Diameter:
Between 0.6880 inches and 0.6910 inches
Undercut Width:
Between 0.0590 inches and 0.0650 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.3180 inches single shaft and 0.3860 inches single shaft
Fragility Factor:
Moderately rugged
Rotor Input Voltage Rating In Volts:
Between 0.5 and 16.5
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
Between 522.75 and 707.25
Zso Resistance In Ohms:
Between 85.00 and 115.00
Zrs Resistance In Ohms:
Between 697.00 and 943.00
Phase Shift Angle In Deg:
Between 19.500 input to output and 22.500 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
20.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
25.00
Interaxis Error Angular Range In Minutes:
-15.0/+15.0
Electrical Error Angular Range In Minutes:
-14.0/+14.0
Pilot Length:
Between 0.0370 inches and 0.0430 inches
Mounting Surface To Terminal End Distance:
1.2900 inches
Plus J Zro Reactance In Ohms:
Between 1232.50 and 1667.50
Shaft Slot Depth:
0.0270 inches single shaft and 0.0320 inches single shaft
Plus J Zso Reactance In Ohms:
Between 246.45 and 333.55
Shaft Slot Width:
0.0270 inches single shaft and 0.0320 inches single shaft
Plus J Zrs Reactance In Ohms:
Between 161.50 and 218.50
Shaft Type:
Round, slotted single shaft
Transformation Ratio:
Between 0.400 rotor to stator and 0.416 rotor to stator
Terminal Type And Quantity:
7 wire lead
Item Name:
Tandem Brushless Resolver
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
