Product Technical Spec.
Body Material:
Steel, corrosion resisting
Body Style:
Standard round c
Shoulder Diameter:
Between 1.3115 inches and 1.3120 inches
Pilot Diameter:
Between 0.8745 inches and 0.8750 inches
Overall Length:
2.4780 inches
Flange Diameter:
Between 1.4340 inches and 1.4370 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
1.3120 inches
Undercut Width:
0.0780 inches
Shaft Diameter:
0.1867 inches single shaft and 0.1872 inches single shaft
Shaft Length:
0.5620 inches single shaft
Rotor Input Voltage Rating In Volts:
60.0
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
480.00
Rotor Dc Resistance In Ohms:
320.00
Stator Dc Resistance In Ohms:
390.00
Compensation Method:
Winding compensated
Compensator Dc Resistance In Ohms:
520.00
Compensator Transformation Ratio In Percent:
0.990 rotor to compensator
Phase Shift Angle In Deg:
8.500 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
15.00
Interaxis Error Angular Range In Minutes:
-5.0/+5.0
Output Voltage Functional Error Range In Percent:
-0.1/+0.1
Actuator Friction Torque At Minus 55 Deg Celsius:
0.20 inch-ounces
Actuator Friction Torque At Plus 25 Deg Celsius:
0.10 inch-ounces
Alignment Hole Quantity:
4
Pilot Length:
0.0400 inches
Shoulder Length:
0.1320 inches
Mounting Surface To Terminal End Distance:
1.9160 inches
Plus J Zro Reactance In Ohms:
2500.00
Shaft Type:
Round single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
0.980 rotor to stator
Alignment Hole Bolt Circle Diameter:
1.1000 inches
Terminal Type And Quantity:
12 pin
Item Name:
Resolver,brushless,differential,electrical
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
