Product Technical Spec.
Body Material:
Steel, corrosion resisting
Body Style:
Standard round c
Shoulder Diameter:
1.0000 inches
Pilot Diameter:
0.5000 inches
Overall Length:
2.1930 inches
Flange Diameter:
1.0620 inches
Flange Thickness:
0.0620 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
0.0810 inches
Shaft Diameter:
0.1200 inches single shaft
Shaft Length:
0.5000 inches single shaft
Fragility Factor:
Moderately rugged
Rotor Input Voltage Rating In Volts:
115.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
7.0 milliamperes
Rotor Input Electrical Power Rating:
101.0 allqjaa3.500 finished-chamfered
Zro Resistance In Ohms:
2060.00
Zso Resistance In Ohms:
68.00
Rotor Dc Resistance In Ohms:
820.00
Stator Dc Resistance In Ohms:
62.00
Phase Shift Angle In Deg:
2.800 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
15.00
Maximum Linear Range In Deg:
-50.0/+50.0
Linearity In Percent:
0.50
Output Voltage Change Per Deg In Volts:
0.332
Actuator Friction Torque At Minus 55 Deg Celsius:
9.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
3.0 centimeter-grams
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0005 inches
Shaft End Play:
Between 0.0003 inches and 0.0008 inches
Pilot Length:
0.0620 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.6000 inches
Shaft Maximum Runout:
0.0010 inches
Plus J Zro Reactance In Ohms:
16300.00
Shaft Slot Depth:
0.0320 inches single shaft
Plus J Zso Reactance In Ohms:
127.00
Shaft Slot Width:
0.0320 inches single shaft
Shaft Type:
Round, slotted single shaft
Transformation Ratio:
0.685 rotor to stator
Shaft Radial Play Determining Weight:
4.0 ounces
Shaft End Play Determining Weight:
8.0 ounces
Terminal Type And Quantity:
4 wire lead
Item Name:
Induction Potentiometer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
