Product Technical Spec.
Body Material:
Any acceptable
Body Style:
Standard round c
Shoulder Diameter:
Between 1.3114 inches and 1.3120 inches
Pilot Diameter:
Between 0.8745 inches and 0.8750 inches
Overall Length:
Between 2.4890 inches and 2.5150 inches
Flange Diameter:
Between 1.4340 inches and 1.4400 inches
Flange Thickness:
Between 0.0900 inches and 0.0960 inches
Undercut Diameter:
Between 1.3090 inches and 1.3150 inches
Undercut Width:
0.0780 inches
Shaft Diameter:
0.1870 inches single shaft and 0.1872 inches single shaft
Shaft Length:
0.6220 inches single shaft and 0.6420 inches single shaft
Securing Hole Quantity:
4
Rotor Input Voltage Rating In Volts:
115.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
200.0 milliamperes
Rotor Input Electrical Power Rating:
3.1 watts
Zro Impedance Magnitude In Ohms:
675.50
Zro Impedance Angle In Deg:
83.50
Rotor Dc Resistance In Ohms:
53.00
Stator Dc Resistance In Ohms:
44.00
Phase Shift Angle In Deg:
4.600 input to output
Electrical Error Angular Range In Minutes:
-3.0/+3.0
Spline Tooth Quantity:
21 single shaft
Receiver Error Angular Range In Minutes:
-45.0/+45.0
Actuator Friction Torque At Plus 25 Deg Celsius:
0.05 inch-ounces
Torque Gradient Per Angular Deg:
0.030 inch-ounces
Pilot Length:
Between 0.0370 inches and 0.0430 inches
Shoulder Length:
Between 0.1290 inches and 0.1350 inches
Mounting Surface To Terminal End Distance:
Between 1.7690 inches and 1.7750 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Mounting Facility Screw Thread Series Designator:
Unc
Shaft Thread Length:
0.2000 inches single shaft
Shaft Type:
Spline w/threads single shaft
Alignment Hole Depth:
0.1250 inches
Mounting Facility Screw Thread Diameter:
0.112 inches
Transformation Ratio:
0.767 rotor to stator
Alignment Hole Bolt Circle Diameter:
1.1030 inches
Shaft Thread Size:
0.190 inches single shaft
Terminal Type And Quantity:
5 tab, solder lug
Item Name:
Synchro Slave Crane
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
