Product Technical Spec.
Body Style:
Standard round c
Shoulder Diameter:
1.0000 inches
Pilot Diameter:
0.6250 inches
Overall Length:
2.1770 inches
Flange Diameter:
1.0620 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
0.0500 inches
Shaft Diameter:
0.1200 inches single shaft
Shaft Length:
0.5000 inches single shaft
Fragility Factor:
Moderately rugged
End Application:
Id663/arn
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
90.0 milliamperes
Rotor Input Electrical Power Rating:
280.0 allqjaa3.500 finished-chamfered
Zro Resistance In Ohms:
35.00
Zso Resistance In Ohms:
8.10
Zrs Resistance In Ohms:
49.50
Rotor Dc Resistance In Ohms:
18.00
Stator Dc Resistance In Ohms:
7.50
Phase Shift Angle In Deg:
3.800 input to output
Electrical Error Angular Range In Minutes:
-30.0/+30.0
Actuator Friction Torque At Minus 55 Deg Celsius:
7000.0 millimeter-milligrams
Actuator Friction Torque At Plus 25 Deg Celsius:
3500.0 millimeter-milligrams
Torque Gradient Per Angular Deg:
2400.0 millimeter-milligrams
Alignment Hole Quantity:
4
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0010 inches
Shaft End Play:
Between 0.0020 inches and 0.0050 inches
Pilot Length:
0.0620 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.6000 inches
Shaft Maximum Runout:
0.0010 inches
Shaft Hole Diameter:
0.0600 inches single shaft and 0.0630 inches single shaft
Plus J Zro Reactance In Ohms:
288.00
Plus J Zso Reactance In Ohms:
47.00
Plus J Zrs Reactance In Ohms:
24.00
Shaft Type:
Round, hollowed single shaft
Alignment Hole Depth:
0.0700 inches
Transformation Ratio:
0.454 stator to rotor
Alignment Hole Bolt Circle Diameter:
0.8120 inches
Shaft Radial Play Determining Weight:
4.0 ounces
Shaft End Play Determining Weight:
8.0 ounces
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro Slave Crane
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Number:
TRH-11-RCBS-2
