Product Features
Weapon system essential
Detail Specifications
Body Material:
Steel, stainless
Body Style:
Standard round d
Shoulder Diameter:
Between 2.6950 inches and 2.7000 inches
Pilot Diameter:
0.3000 inches
Second Shoulder Diameter:
Between 2.7490 inches and 2.7500 inches
Second Shoulder Length:
0.3750 inches
Overall Length:
5.1000 inches
Flange Diameter:
Between 3.0990 inches and 3.1000 inches
Flange Thickness:
0.2500 inches
Body Diameter:
2.7000 inches
Shaft Diameter:
0.2403 inches single shaft and 0.2405 inches single shaft
Shaft Length:
0.7300 inches single shaft
Fragility Factor:
Moderately rugged
End Application:
5forrestal class cv; sturgeon class ssn (637); los angeles class ssn (688); ticonderoga class cg (47); gun fire control system, mk 68; nimitz class cvn; spruance class dd (963); virginia class cgn (41); wmis, wind measuring and indicating systems
Maximum Tempurature Rise:
60.0 degrees celsius
Rotor Input Voltage Rating In Volts:
115.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
1.7 amperes
Rotor Input Electrical Power Rating:
14.4 watts
Phase Shift Angle In Deg:
2.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
35.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
170.00
Electrical Error Angular Range In Minutes:
-8.0/+8.0
Spline Tooth Quantity:
22 single shaft
Receiver Error Angular Range In Minutes:
-36.0/+36.0
Torque Gradient Per Angular Deg:
0.670 inch-ounces
Pilot Length:
0.0300 inches
Shoulder Length:
0.5950 inches
Aft Of First Flange Diameter:
Between 2.7490 inches and 2.7500 inches
Mounting Surface To Terminal End Distance:
4.3700 inches
Spline Tooth Diametral Pitch:
96 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Shaft Thread Length:
0.3100 inches single shaft
Shaft Type:
Spline w/threads single shaft
Criticality Code Justification:
Feat
Transformation Ratio:
0.783 rotor to stator
Shaft Thread Size:
0.250 inches single shaft
Test Data Document:
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
5 screw
Specification Data:
81349-mil-s-20708/62 government specification
Item Name:
Synchro,receiver-transmitter
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Number:
M20708/62-01A
Part Number:
M20708/62-01A
