Detail Specifications
Body Material:
Steel, stainless
Body Style:
Standard round double flange a
Shoulder Diameter:
Between 3.3290 inches and 3.3340 inches
Pilot Diameter:
1.6250 inches
Second Shoulder Diameter:
Between 3.3740 inches and 3.3750 inches
Second Shoulder Length:
0.3750 inches
Overall Length:
5.9500 inches
Flange Diameter:
Between 3.6240 inches and 3.6250 inches
Flange Thickness:
0.2500 inches
Body Diameter:
Between 3.3850 inches and 3.3900 inches
Shaft Diameter:
0.2403 inches single shaft and 0.2405 inches single shaft
Shaft Length:
0.7000 inches single shaft
Fragility Factor:
Moderately rugged
Distance Between Flanges:
1.8120 inches
Maximum Tempurature Rise:
35.0 degrees celsius
Rotor Input Voltage Rating In Volts:
115.0
Rotor Input Current Rating:
830.0 milliamperes
Rotor Input Electrical Power Rating:
9.25 watts
Zss Impedance Magnitude In Ohms:
Between 7.00 and 10.00
Zss Impedance Angle In Deg:
Between 30.00 and 40.00
Phase Shift Angle In Deg:
3.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
35.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
170.00
Electrical Error Angular Range In Minutes:
-10.0/+10.0
Spline Tooth Quantity:
22 single shaft
Receiver Error Angular Range In Minutes:
-36.0/+36.0
Torque Gradient Per Angular Deg:
0.900 inch-ounces
Pilot Length:
0.1600 inches
Shoulder Length:
0.6550 inches
Mounting Surface To Terminal End Distance:
5.0600 inches
Spline Tooth Diametral Pitch:
96 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Shaft Thread Length:
0.3100 inches single shaft
Shaft Type:
Spline w/threads single shaft
Transformation Ratio:
0.783 rotor to stator
Shaft Thread Size:
0.250 inches single shaft
Test Data Document:
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
5 screw
Specification Data:
81349-mil-s-20708/74 government specification
Item Name:
Synchro,receiver-transmitter
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Number:
M20708/74-01A
