Technical Specifications of NSN
Body Style:
Standard round, rear mounting flange
Shoulder Diameter:
1.2500 inches
Pilot Diameter:
1.0625 inches
Second Shoulder Diameter:
1.9000 inches
Second Shoulder Length:
0.7000 inches
Overall Length:
3.7330 inches
Flange Diameter:
Between 0.2480 inches and 0.2500 inches
Flange Thickness:
0.2500 inches
Body Diameter:
0.1950 inches
Shaft Diameter:
0.2035 inches single shaft
Shaft Length:
0.2600 inches single shaft
Schematic Diagram Designator:
1 y-rotor, 1 stator
Fragility Factor:
Moderately rugged
Maximum Tempurature Rise:
3.0 degrees celsius
Stator Input Voltage Rating In Volts:
90.0
Stator Input Current Rating:
24.0 milliamperes
Stator Input Electrical Power Rating:
58.0 milliwatts
Zro Resistance In Ohms:
596.00
Zso Resistance In Ohms:
1000.00
Zrs Resistance In Ohms:
850.00
Rotor Dc Resistance In Ohms:
435.00
Stator Dc Resistance In Ohms:
930.00
Phase Shift Angle In Deg:
14.000 output to input
Maximum Total Null Voltage Output In Millivolts Per Volt:
60.00
Electrical Error Angular Range In Minutes:
-18.0/+18.0
Alignment Hole Quantity:
3
Shaft End Play:
0.0150 inches
Pilot Length:
0.1250 inches
Shoulder Length:
0.0550 inches
Second Shoulder Face To Rear Flange Distance:
1.7000 inches
Shaft Maximum Runout:
0.0010 inches
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Shaft Thread Length:
0.1560 inches single shaft
Plus J Zro Reactance In Ohms:
1930.00
Plus J Zso Reactance In Ohms:
3040.00
Plus J Zrs Reactance In Ohms:
310.00
Shaft Type:
Round, threaded single shaft
Alignment Hole Depth:
0.1560 inches
Transformation Ratio:
0.735 rotor to stator
Alignment Hole Bolt Circle Diameter:
0.8440 inches
Shaft Thread Size:
0.112 inches single shaft
Test Data Document:
81349-mil-s-2335 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
6 screw
Item Name:
Synchro,control Transformer
Other Related Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
