Detail Specifications
Body Material:
Steel, stainless
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
Between 2.3360 inches and 2.3760 inches
Flange Diameter:
Between 1.0570 inches and 1.0620 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
0.9750 inches
Undercut Width:
0.0620 inches
Shaft Diameter:
0.1198 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.5460 inches single shaft and 0.5650 inches single shaft
Fragility Factor:
Moderately rugged
Maximum Tempurature Rise:
20.0 degrees celsius
Securing Hole Quantity:
4
Rotor Input Voltage Rating In Volts:
115.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
31.0 milliamperes
Rotor Input Electrical Power Rating:
490.0 milliwatts
Zro Resistance In Ohms:
Between 3720.00 and 4700.00
Zss Resistance In Ohms:
Between 410.00 and 500.00
Zro Impedance Magnitude In Ohms:
Between 80.00 and 84.00
Zss Impedance Magnitude In Ohms:
Between 17.00 and 26.00
Phase Shift Angle In Deg:
4.500 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
45.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
75.00
Electrical Error Angular Range In Minutes:
-7.0/+7.0
Actuator Friction Torque At Minus 55 Deg Celsius:
0.07 inch-ounces
Actuator Friction Torque At Plus 25 Deg Celsius:
0.07 inch-ounces
Pilot Length:
Between 0.0450 inches and 0.0650 inches
Shoulder Length:
Between 0.0590 inches and 0.0790 inches
Mounting Surface To Terminal End Distance:
Between 1.7910 inches and 1.8110 inches
Mounting Facility Screw Thread Series Designator:
Unc
Shaft Slot Depth:
0.0250 inches single shaft
Shaft Slot Width:
0.0200 inches single shaft
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.1250 inches
Mounting Facility Screw Thread Diameter:
0.112 inches
Transformation Ratio:
0.783 rotor to stator
Alignment Hole Bolt Circle Diameter:
0.6250 inches
Test Data Document:
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
5 screw
Item Name:
Generator,self-synchronous
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
