Product Technical Spec.
Body Style:
Standard round d
Shoulder Diameter:
Between 1.9850 inches and 1.9900 inches
Pilot Diameter:
Between 0.5900 inches and 0.6000 inches
Second Shoulder Diameter:
Between 1.9985 inches and 1.9995 inches
Second Shoulder Length:
Between 0.2480 inches and 0.2500 inches
Overall Length:
4.2990 inches
Flange Diameter:
Between 2.2490 inches and 2.2500 inches
Flange Thickness:
0.2030 inches
Body Diameter:
Between 1.9850 inches and 1.9900 inches
Shaft Diameter:
0.2500 inches single shaft
Shaft Length:
0.6930 inches single shaft and 0.7190 inches single shaft
Fragility Factor:
Moderately rugged
Rotor Input Voltage Rating In Volts:
115.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
264.0 milliamperes
Rotor Input Electrical Power Rating:
3.0 watts
Zro Impedance Magnitude In Ohms:
Between 470.00 and 580.00
Zro Impedance Angle In Deg:
Between 84.00 and 87.50
Zss Impedance Magnitude In Ohms:
Between 21.60 and 26.00
Zss Impedance Angle In Deg:
Between 42.00 and 47.00
Phase Shift Angle In Deg:
1.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
32.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
48.00
Electrical Error Angular Range In Minutes:
-3.0/+3.0
Spline Tooth Quantity:
22 single shaft
Actuator Friction Torque At Minus 55 Deg Celsius:
0.2 centimeter-grams
Pilot Length:
Between 0.4050 inches and 0.4220 inches
Shoulder Length:
Between 0.1570 inches and 0.1720 inches
Aft Of First Flange Diameter:
Between 1.9985 inches and 1.9995 inches
Mounting Surface To Terminal End Distance:
3.5800 inches
Spline Tooth Diametral Pitch:
96 single shaft
Shaft Type:
Spline single shaft
Transformation Ratio:
0.783 rotor to stator
Terminal Type And Quantity:
5 screw
Item Name:
Generator,self-synchronous
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
