Detail Specifications
Body Material:
Any acceptable
Body Style:
Standard round b
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
2.3560 inches
Flange Diameter:
Between 1.0570 inches and 1.0620 inches
Flange Thickness:
0.0930 inches
Undercut Width:
0.0500 inches
Shaft Diameter:
0.1867 inches single shaft and 0.1872 inches single shaft
Shaft Length:
0.5000 inches single shaft
Fragility Factor:
Moderately rugged
Maximum Tempurature Rise:
20.0 degrees celsius
Rotor Input Voltage Rating In Volts:
Between 114.0 and 116.0
Frequency In Hertz:
Between 396.0 and 404.0
Rotor Input Current Rating:
31.0 milliamperes
Rotor Input Electrical Power Rating:
490.0 milliwatts
Zro Impedance Magnitude In Ohms:
Between 3720.00 and 4700.00
Zro Impedance Angle In Deg:
Between 80.00 and 84.00
Zss Impedance Magnitude In Ohms:
Between 410.00 and 500.00
Zss Impedance Angle In Deg:
Between 17.00 and 26.00
Phase Shift Angle In Deg:
Between 3.000 input to output and 6.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
45.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
75.00
Actuator Friction Torque At Plus 25 Deg Celsius:
0.07 inch-ounces
Alignment Hole Quantity:
4
Pilot Length:
0.0620 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.7320 inches
Shaft Type:
Round single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
0.783 stator to rotor
Alignment Hole Bolt Circle Diameter:
Between 0.8090 inches and 0.8150 inches
Test Data Document:
18876-10181799 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
5 screw
Item Name:
Synchro Master Crane
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
