Product Technical Spec.
Body Material:
Steel, stainless
Body Style:
Standard round b
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
2.2910 inches
Flange Diameter:
1.0670 inches
Flange Thickness:
Between 0.0880 inches and 0.0980 inches
Undercut Width:
Between 0.0450 inches and 0.0550 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.4380 inches single shaft and 0.4420 inches single shaft
Rotor Input Voltage Rating In Volts:
26.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
280.0 milliamperes
Rotor Input Electrical Power Rating:
1.11 watts finished-chamfered
Zro Impedance Magnitude In Ohms:
18.10
Zro Impedance Angle In Deg:
79.50
Zso Impedance Magnitude In Ohms:
107.00
Zso Impedance Angle In Deg:
81.70
Rotor Dc Resistance In Ohms:
9.00
Stator Dc Resistance In Ohms:
3.00
Phase Shift Angle In Deg:
8.000 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
26.00
Electrical Error Angular Range In Minutes:
-5.0/+5.0
Actuator Friction Torque At Minus 55 Deg Celsius:
4.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
16.0 centimeter-grams
Alignment Hole Quantity:
4
Shaft Maximum Radial Play:
0.0005 inches
Shaft End Play:
Between 0.0005 inches and 0.0030 inches
Pilot Length:
0.0570 mils and 0.0670 centimeters
Shoulder Length:
0.0570 mils and 0.0670 centimeters
Mounting Surface To Terminal End Distance:
1.7820 inches
Shaft Maximum Runout:
0.0008 inches
Shaft Slot Depth:
0.0250 inches single shaft and 0.0370 inches single shaft
Shaft Slot Width:
0.0200 inches single shaft and 0.0370 inches single shaft
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
Between 0.1200 inches and 0.1300 inches
Transformation Ratio:
0.454 rotor to stator
Alignment Hole Bolt Circle Diameter:
Between 0.8090 inches and 0.8150 inches
Shaft Radial Play Determining Weight:
4.0 ounces
Shaft End Play Determining Weight:
8.0 ounces
Test Data Document:
06481-900141-69 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
5 screw
Item Name:
Synchro Master Crane
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
